 Glaze N Seal Natural Look Penetrating Sealer
Offers long lasting, economical "Natural Look" stain protection against water based stains for all concrete, masonry, natural stone, unglazed tile, and grout. May also use as grout release.
- Natural Look
- Penetrating Sealer
- Water Based
Product Data
MSDS
|
 Glaze N Seal Multi-Purpose Sealer
Offers superior, low gloss protection for concrete, masonry, natural stone, unglazed tile, and grout. This easy to apply, non-yellowing acrylic slightly enhances surface, while providing excellent protection against toughest oil, water, acid, efflorescence. Use indoors and outdoors. Also, highly recommended for sealing concrete countertops.
- Medium Gloss
- Film Forming Sealer
- Water Based
Product Data
MSDS
|
 Original Wet Look Lacquer
The original "Wet Look" Lacquer provides beautiful high gloss protection to decorative concrete, masonry, and natural stone. For use on porous materials. A clear, non- yellowing sealer that resists tough oils, water, and acid - indoors and outdoors. Deep bonding formula resists peeling, cracking, UV degradation and efflorescence. Great for driveways, patios, fountains, and ponds
- Wet Look
- Film Forming Sealer
- Solvent Based
Product Data
MSDS
|
 Grip 'N Seal Anti Slip Additive
Add to coating - type sealer or paint to increase slip resistance. A unique micronized polymer mixes easily with seal to add slip resistance. It does not change the sealer appearance.
Product Data
MSDS
|
 Kure-N-Seal™ 25 LV
Kure-N-Seal™ 25 LV is a transparent, low-viscosity, 25% solids, VOC-compliant, and solvent-based acrylic curing, sealing, and dustproofing compound designed for better application at cool temperatures. Its semi-gloss finish provides good UV resistance and gloss retention.
Product Data
MSDS
|
 Kure-N-Seal™ 30
Kure-N-Seal™ 30 is a transparent, 30% solids, solvent-based, acrylic curing membrane. Apply it to damp or dry surfaces to provide a high-gloss finish.
Product Data
MSDS
|
 Enviroseal® PBT
Enviroseal® PBT is a high-performance, water-based, clear, silane/siloxane sealer designed to provide long-term protection for the most challenging split-faced and lightweight block as well as standard CMU.
Product Data
MSDS
|
 NP 1™
NP 1™ is a one-component, high-performance, nonpriming, gun-grade, elastomeric polyurethane sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry.
Product Data
MSDS
|
 Waterplug®
Waterplug® is a one-component, quick-setting, Portland-cement-based hydraulic repair mortar that instantly stops running water through holes or cracks in concrete or masonry. It expands as it sets to lock into place even under constant water pressure.
Product Data
MSDS
|
"Anti-Hydro"® Waterproof Concrete
An Admixture That Has Been Widely Used Since 1904 To Integrally Waterproof Concrete And Increase Workability, Strength, Hardness, And Durability.
"Anti-Hydro" is a combination of organic and inorganic chemicals that reacts with portland cement to produce more complete hydration. Water requirements, bleed water and shrinkage are reduced. The increased hydration provides internal curing and a much denser cement paste. "Anti-Hydro" increases the early and ultimate strength of concrete. These combined reactions produce impermeable concrete that is hard and non-dusting.
MSDS
|